Easy, Affordable Financing Available Now!
Apply NowBush Hog 2215
2215
2215 Flex Wing Rotary Cutter
MEDIUM-DUTY PLUS FLEX-WING
The Bush Hog® model 2215 Flex-Wing rotary cutter is designed to cut grass, weeds, and brush up to 3 1/2” in diameter. It is recommended for use in pasture maintenance, crop shredding, and roadside maintenance. With maintenance friendly features such as EZ clean decks, EZ lube drivelines and Bush Hog® tough durability, the 2215 is another Flex-Wing example of Bush Hog® Performance You Can Count On.
Features
Performance Features
- Wing skids are 3/8 inch thick for extended wear and outside edges are turned up at 45 degrees to stop heavy ground contact that might damage the sidebands.
- Center section blades properly align with center wheels to closely cut out the bottom of ditches.
- Grease fittings and spring steel bushings at axle pivot points for longer life.
- Free wing float without movement of the hydraulic cylinder rod is 22 degrees down and 45 degrees up.
- Optional grass/row crop baffles for improved distribution in grass and corn stalk shredding.
Construction Features
- Center section axle spindles are centered on the axle arm for equalized loading of vertical forces.
- Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked.
- All grease fittings on the PTO CV driveline and wing drivelines align for quick location of grease points, reducing service times.
- Greaseable Axle Pivot Points with spring steel bushings
- Turnbuckle alignment with wing hinge pin ensures long life of turnbuckle and less hinge wear.
- Powder Coat Paint
Safety Features
- Improved design of wing sidebands means less damage caused by sideband-to-ground contact
Specifications
| MODELS | 2215 |
| CUTTING WIDTH | 15' |
| CUTTING HEIGHT | 2″ -14″ |
| CUTTING CAPACITY | 3 1/2″ |
| TRANSPORT WIDTH* | 8' 2" |
| TRANSPORT HEIGHT** | 7' 3" |
| TRANSPORT LENGTH*** | 15' 3" |
| APPROXIMATE WEIGHT (LB) | 4,700 |
| APPROXIMATE TONGUE WEIGHT (LB.) | 1,800 |
| MINIMUM TRACTOR PTO HP | 60 |
| HITCH | "PERMA-LEVEL" |
| CENTER DECK | 10GA |
| WING DECKS | 10GA |
| WING CUTTING ANGLES | 22° DOWN AND 45° UP |
| WING LEVEL ADJUSTMENT | TURNBUCKLES |
| SIDEBANDS | 1/4″ X 13 1/2″ |
| TRANSFER GEARBOX (HP) | 250 |
| CUTTING GEARBOX (HP) | 210 |
| INPUT DRIVELINE | CATEGORY 6 |
| CUTTING DRIVELINES | CATEGORY 4 |
| BLADE HOLDER | 7GA ROUND |
| BLADES | 1/2″ X 4″ |
| BLADE TIP SPEED (FPM) | 16,286 |
| AXLE SUSPENSION | SPRINGS @ EACH AXLE |
| CENTER & WING HYDRAULICS | 3 HOSES STANDARD |
| SAFETY TOW CHAIN | STANDARD |
| DISTRIBUTION BAFFLES | OPTIONAL |
| PTO DRIVELINE SUPPORT | OPTIONAL |
| *Measured from Wing Skid to Wing Skid when Folded **Measured at Maximum Transport Height ***Measured from hitch tip to rear of 21″ Laminated Tire |
