Easy, Affordable Financing Available Now!
Apply NowLoftness 90MH
Skid Steer Mounted 90MH
Loftness designed the hydraulic-driven flail mower to take advantage of the power and versatility of skid steers. Easy to operate and maintain, the Loftness skid steer mounted flail mower is packed with high-performance features that power through the toughest grasses, weeds and brush up to 3/4 inches in diameter.
Features
Features
- Universal skid-steer mount
- 10 gauge (3.4 mm) steel body
- Curved hood for improved suction
- 1 3/4 inch (4.5 cm) rotor bearings
- Bearing deflector guard
- 1/4 inch (6.4 mm) steel end plate
- Adjustable skid shoes
- Fine-cut, reversible knives
- Structural steel frame
- 0 to 4.5 inch (0-11.4 cm) cutting height
- Steel deflector shields
- Easy access vented belt shield
- Support bearing
- Directly coupled hydraulic motor
- High pressure gear-type motor
- No case drain needed
- All-welded hitch
- Rear steel deflector
- 1 1/2 inch (3.8 cm) roller bearings
- Full-width adjustable gauge roller
- Roller scraper
- Non-slip safety step
- Taper-lock sheaves
- Spring-loaded belt tightener
- 3-groove banded belt
Advantages
- Front-mounted, skid-steer hydrostatic drive
- Cuts brush, weeds or grass with same knives
- Leaves an even mat of mulch for faster decomposition
- Two sizes to choose from: 72 & 90 inch (213 & 228 cm)
- Mowers work with as little as 10 gpm (38 lpm). Note: 20+ gpm (75+ lpm) is recommended for tall weeds and intermittent brush.
- Tractor-mounted models also available (three-point hitch & 540 PTO required)
Specs
| Model | 90MH |
| Flow Requirement | 26-43 GPM @ 4300 PSI or 13-26 GPM @ 3400 PSI |
| Max Hydraulic HP Input | 90 |
| Width of Cut in Inches | 90 |
| Overall Width in Inches | 102 |
| Number of Knives | 120 (60 sets) |
| Weight in Pounds | 1208 |
| Rotor Speed | 1900-2200 RPM |
Warning: Due to the possible danger of flying debris, impact-resistant shielding MUST be provided for the operator. The owner is responsible for providing operator-protection devices on the power unit.
